This course focuses on configuring and troubleshooting a VMware NSX® deployment. This course presents NSX as a part of the software-defined data Centre. You will learn how to use logical switching in NSX to virtualize your switching environment and how to use gateway services, firewall configurations, and security services to help secure and optimize your NSX environment. In addition, you will be presented with various types of technical problems that you will learn how to identify and solve through a systematic process. You will also be introduced to several operational, management, and troubleshooting tools.
Course content
Course Introduction
- Introductions and course logistics
- Course objectives
- Identify additional resources
Introduction to vSphere Networking
- Describe vSphere networking components
- Describe vSphere standard switches
- Describe vSphere distributed switches
Introduction to NSX
- Describe the benefits of NSX
- Identify NSX key use cases
NSX Architecture
- Describe the NSX architecture
- Describe the cloud management, management, control, and data planes of NSX
- Identify the component interactions
- Describe the NSX Controller cluster and its functions
- Explain the NSX Controller workload distribution
NSX Infrastructure Preparation
- Explain the steps required for an NSX installation
- Describe what is involved in planning an NSX deployment
- Describe the NSX Controller cluster and deployment
- Describe NSX Controller cluster high availability and load distribution
- Explain how to deploy and configure the NSX Controller cluster
- Explain the workflow involved in host preparation
NSX Logical Switch Networks
- Explain transport zones, VXLANs, and VXLAN tunnel endpoints (VTEPs)
- Describe the procedure of preparing the infrastructure for virtual networking
- Describe the configuration of vSphere distributed switches for VXLAN
- Identify the components involved in NSX logical switching
- Define VLANs for VXLAN
NSX Logical Routing
- Explain the east-west and north-south routing concepts
- Define the NSX distributed logical router
- Explain the logical router, interfaces, and interface addresses
- Describe the management plane and control plane interaction
- Describe logical router deployment models and two-tier routing for east-west traffic
- Explain the common topologies of an NSX Edge services gateway
Advanced NSX Logical Routing
- Describe how routers connect remote networks
- Explain route redistribution methods
- Describe less-than-or-equal (LE) and greater-than-or-equal (GE) configurations
- Describe routing event notification enhancements
- Configure equal-cost multipath (ECMP) routing
- Describe high availability for NSX Edge service gateways
NSX L2 Bridging
- Explain L2 bridging use cases
- Describe software and hardware L2 bridging between VXLAN and VLANs
- Discuss L2 bridging packet flows
NSX Edge Services
- Describe the NSX Edge services
- Explain how network address translation (NAT) works
- Describe source NAT and destination NAT
- Explain NAT64
- Explain the function of load balancing
- Explain the one-armed and inline load-balancing architectures
- Explain the DHCP and DNS services of NSX Edge
NSX Edge VPN Services
- Describe the NSX Edge VPN services
- Describe the VPN use cases
- Configure an L2 VPN on an NSX Edge device
- Configure an NSX Edge device for IPsec VPN services
- Explain NSX Edge SSL VPN-Plus services
- Configure NSX Edge SSL VPN-Plus server settings
NSX Security Services
- Describe the policy enforcement of the distributed firewall
- Describe virtualization context-awareness
- Explain custom network and security containers
- Describe the architecture of an NSX Edge firewall
- Explain DHCP snooping
- Explain ARP snooping
NSX Advanced Security Services
- Describe NSX SpoofGuard
- Identify how tags enable dynamic security service chains
- Explain Service Composer groups, policies, tags
- Describe the Identity Firewall architecture
- Explain Application Rule Manager
- Explain how to create a monitoring session
NSX Introspection Services
- Describe the types of introspection services
- Describe the installation and configuration of Guest Introspection and Network Introspection
- Summarize Guest Introspection and Network Introspection alarms, events, and audit messages
Cross-vCentre NSX
- Describe cross-vCentre NSX features and use cases
- Identify NSX Manager roles and NSX Controller cluster placement
- Deploy universal logical networks
- Explain the design considerations for cross-vCentre NSX
Troubleshooting Methodology
- Develop a structured troubleshooting approach
- Differentiate between symptoms and root causes
- Identify and isolate problems residing in various areas
- Apply an appropriate methodology and procedure to troubleshooting
NSX Troubleshooting and Operational Tools
- Discuss NSX operational requirements
- Use the native NSX tools (such as the central CLI, the NSX dashboard, and Application Rule Manager) to solve various types of problems
- Use vRealize Network Insight to identify and analyze problems
- Use vRealize Log Insight Content Pack for NSX in troubleshooting and operations
Troubleshooting and Operating NSX Infrastructure
- Explain the NSX infrastructure and component communications
- Troubleshoot NSX Manager and the management plane
- Troubleshoot NSX Controller and the control plane
- Troubleshoot problems in host preparation
Troubleshooting and Operating NSX Logical Switches
- Explain VXLAN and logical switching components
- Verify the VXLAN and logical switch configuration and status
- Identify and troubleshoot common L2 configuration errors
- Use the GUI, the CLI, packet capture, traceflow, and other tools to troubleshoot logical switching problems
Troubleshooting and Operating NSX Logical Routers
- Describe the NSX logical routing architecture
- Explain routing components, functions, and communications
- Verify logical router configuration settings
- Use packet capture on routers and perform packet walk
- Use the GUI, the CLI, traceflow, and other tools to troubleshoot various logical routing problems
Troubleshooting and Operating NSX Edge Services
- Verify edge services (such as DHCP and DNS) configuration settings and operational status
- Troubleshoot various types of VPN services (SSL VPN-Plus, L2 VPN, and IPsec VPN)
- Verify the configuration and status of logical load balancers
- Troubleshoot common load-balancing and high availability scenarios
Troubleshooting and Operating NSX Security Services
- Discuss the NSX distributed firewall architecture, components, communication channels, and features
- Use the CLI and other tools to troubleshoot the configuration and operations of the NSX distributed firewall and the NSX Edge firewall
- Explain and troubleshoot the Service Composer components and architecture
- Troubleshoot common problems related to Identity Firewall
- Verify Guest Introspection deployment configuration and functions, and troubleshoot common problems
To see the full course content Download now
Course Prerequisites
- Understanding of enterprise switching and routing
- VMware Data Centre Virtualization Fundamentals
- Knowledge of TCP/IP services
- Experience with firewalls and firewall rule sets
Who can attend
- Experienced system administrators or network administrators
Number of Hours: 30hrs
Certification
Key features
- One to One Training
- Online Training
- Fastrack & Normal Track
- Resume Modification
- Mock Interviews
- Video Tutorials
- Materials
- Real Time Projects
- Virtual Live Experience
- Preparing for Certification
FAQs
DASVM Technologies offers 300+ IT training courses with 10+ years of Experienced Expert level Trainers.
- One to One Training
- Online Training
- Fastrack & Normal Track
- Resume Modification
- Mock Interviews
- Video Tutorials
- Materials
- Real Time Projects
- Materials
- Preparing for Certification
Call now: +91-99003 49889 and know the exciting offers available for you!
We working and coordinating with the companies exclusively to get placed. We have a placement cell focussing on training and placements in Bangalore. Our placement cell help more than 600+ students per year.
Learn from experts active in their field, not out-of-touch trainers. Leading practitioners who bring current best practices and case studies to sessions that fit into your work schedule. We have a pool of experts and trainers are composed with highly skilled and experienced in supporting you in specific tasks and provide professional support. 24x7 Learning support from mentors and a community of like-minded peers to resolve any conceptual doubts. Our trainers has contributed in the growth of our clients as well as professionals.
All of our highly qualified trainers are industry experts with at least 10-12 years of relevant teaching experience. Each of them has gone through a rigorous selection process which includes profile screening, technical evaluation, and a training demo before they are certified to train for us. We also ensure that only those trainers with a high alumni rating continue to train for us.
No worries. DASVM technologies assure that no one misses single lectures topics. We will reschedule the classes as per your convenience within the stipulated course duration with all such possibilities. If required you can even attend that topic with any other batches.
DASVM Technologies provides many suitable modes of training to the students like:
- Classroom training
- One to One training
- Fast track training
- Live Instructor LED Online training
- Customized training
Yes, the access to the course material will be available for lifetime once you have enrolled into the course.
You will receive DASVM Technologies recognized course completion certification & we will help you to crack global certification with our training.
Yes, DASVM Technologies provides corporate trainings with Course Customization, Learning Analytics, Cloud Labs, Certifications, Real time Projects with 24x7 Support.
Yes, DASVM Technologies provides group discounts for its training programs. Depending on the group size, we offer discounts as per the terms and conditions.
We accept all major kinds of payment options. Cash, Card (Master, Visa, and Maestro, etc), Wallets, Net Banking, Cheques and etc.
DASVM Technologies has a no refund policy. Fees once paid will not be refunded. If the candidate is not able to attend a training batch, he/she is to reschedule for a future batch. Due Date for Balance should be cleared as per date given. If in case trainer got cancelled or unavailable to provide training DASVM will arrange training sessions with other backup trainer.
Your access to the Support Team is for lifetime and will be available 24/7. The team will help you in resolving queries, during and after the course.
Please Contact our course advisor +91-99003 49889. Or you can share your queries through info@dasvmtechnologies.com